Insertion-Style: Face-Based. Parametric: Width, Depth, Height, and Material. Types: Hinged or Top-Sliding. Visibility: Coarse, Medium, and Fine varries. While the box itself is fully-parametric, the shoe-support is not. That is why I decided to make the box un-breakable by using "if" statements. That is to say, if a dimension becomes smaller than the shoe-support, it will revert to a pre-set value. Regarding the visibility, it will progressivley loose details as-needed (showing up as a simple box when "Coarse" is selected). 

No Rating

Product Version: Revit Architecture 2020

214 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Large or Small (Instance)This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can change both the number and size of the plates. These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish. Note: The Image is a sample of what it looks like when two sets of plates are stacked on top of one another. To do this, set the host of the second stack to the face of the first stack. 

No Rating

Product Version: Revit Architecture 2020

1962 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Large or Small (Instance)This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can change both the number and size of the plates. These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish. Note: The Image is a sample of what it looks like when two sets of plates are stacked on top of one another. To do this, set the host of the second stack to the face of the first stack. 

No Rating

Product Version: Revit Architecture 2020

1185 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Both, Large, or SmallThis is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can select which plates you want visible (Plate 1, 2, or leave both checked). These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish.

No Rating

Product Version: Revit Architecture 2020

711 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Position: Hanging or StationaryThis cup was originally designed to be hung on hooks within an antique butler's pantry. However, it can also be used in a stationary setting by selecting one of the pre-set "Type" values or by setting the instance parameters (Height and Angle) to zero (0) degrees. This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Dimmensions", you can change the Height of the Cup (Height), Angle of the Cup (Angle of Cup), and the rotation of the handle (Handle Rotation). These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish.

No Rating

Product Version: Revit Architecture 2020

674 Downloads