|
MIFAB® Series F1100-C-Z 13 1/4” (337) diameter elastomeric flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard reinforced 5” (102) diameter (specify material finish) strainer. (For nonmembrane floors, use MIFAB F1100-Z Series.) |
No Rating |
Product Version: Unknown
13 Downloads
|
|
|
MIFAB® Series MI-G-SDH ____ sanitary acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: removable baffle assembly and cross bar, internal deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, internal steel cone, flexible drawoff hose and cap, hose clamp, line shut off valve and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). |
No Rating |
Product Version: Unknown
104 Downloads
|
|
|
MIFAB® Series F1100-C-ZS lacquered cast iron floor drain with anchor flange and 1/8” (3) recessed, 13 1/4” (337) square elastomeric flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard reinforced 6” x 6” (152 x 152) square strainer. (For non-membrane floors, use MIFAB F1100-ZS Series.) |
No Rating |
Product Version: Unknown
48 Downloads
|
|
|
MIFAB Series MI-HEL ____ helicopter port fuel interceptor constructed from high-strength 1/4” (6) plate steel, ASTM-A242, outlet vent connection, internal vent connection, gasketed access covers fastened with stainless steel bolts, 2” (51) fuel drain connection, 1” (25) fresh water supply connection with gate valve, back flow preventer, automatic water level float valve, external sight glass water level indicator with drain cocks, 2” (51) interceptor drain plugs, channel support rails and body corner lifting lugs. Interceptor shall be coated with a two-part epoxy interior and exterior coating. |
No Rating |
Product Version: Unknown
91 Downloads
|
|
|
MIFAB® Series F1120 lacquered cast iron floor drain with anchor flange, integral deep seal trap, and standard reinforced (specify diamter), (specify material finish) strainer. (For membrane floors, use MIFAB F1120-C Series.) |
No Rating |
Product Version: Unknown
43 Downloads
|
|
|
MIFAB® Series MC-10 (Specify -L for left or -R for right design) single, horizontal, adjustable, water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear
anchor tie down support. |
No Rating |
Product Version: Unknown
38 Downloads
|
|
|
MIFAB® Series F1130C lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, seepage collection sump, integral deep seal trap, and standard reinforced (specify diameter), (specify material finish) strainer, and standard reinforced 5” (127) diameter (specify material finish) top assembly floor cleanout with access cover, “O” ring Test Seal and plug with primary gasket seal. |
No Rating |
Product Version: Unknown
28 Downloads
|
|
|
The BEECO Friendly Reduced Pressure Zone Backflow Preventer is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1013, CSA B64.4 and IAPMO listed. |
No Rating |
Product Version: Unknown
72 Downloads
|
|
|
MIFAB® Series F1140C lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, seepage collection sump, integral deep seal trap, and standard 1” (25) thick, 7” (178) round (specify
F1140C-7) or 9” (235) round (specify F1140C-9), (specify material finish) tractor grate and standard reinforced 5” (127) diameter (specify material finish) floor cleanout with access cover, “O” ring Test Seal and plug with primary gasket seal. |
No Rating |
Product Version: Unknown
20 Downloads
|
|
|
MIFAB® Series F1780 lacquered cast iron indirect waste funnel. |
No Rating |
Product Version: Unknown
30 Downloads
|
|
|
MIFAB® Series F1170-C-SD lacquered cast iron floor drain with integral trap, 2” (51) cleanout (rodding eye), anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and adjustable “SD6” square 6” x 6” (152 x
152) with solid hinged cover and secondary grate. (Specify -44, 2” (51) no hub inlets as shown and required. Maximum three @ 90 degrees. Specify location -A, B, or C.) |
No Rating |
Product Version: Unknown
212 Downloads
|
|
|
MIFAB Series F1210TC lacquered cast iron floor drain with anchor flange, cast iron clamp ring with weepholes for waterproofing membrane, and polished chrome plated strainer. |
No Rating |
Product Version: Unknown
58 Downloads
|
|
|
MIFAB® Series F1220 lacquered cast iron floor drain with standard (specify material finish) strainer and vandal resistant allen key screws. |
No Rating |
Product Version: Unknown
257 Downloads
|
|
|
MIFAB® Series F1230 lacquered cast iron floor drain with standard (specify material finish), 5” (127) diameter strainer (specify material finish). |
No Rating |
Product Version: Unknown
290 Downloads
|
|
|
MIFAB® Series F1320-C-TFB lacquered cast iron floor drain with anchor flange, standard 1” (25) thick, 9” (235) round, (specify material finish) tractor grate, and “True-Fit” sediment bucket designed so that grate cannot be set unless the sediment bucket is in position. |
No Rating |
Product Version: Unknown
12 Downloads
|
|
|
MIFAB® Series F1360 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 16” (406) round, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
19 Downloads
|
|
|
MIFAB® Series R1200-RS lacquered cast iron deep sump roof drain with 15” diameter anchor flange, 2” high cast iron external combined water dam and waterproofing membrane clamp ring, and internal dome strainer. |
No Rating |
Product Version: Unknown
23 Downloads
|
|
|
MIFAB® Series F1430C lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, adjustable collar with deep sump body, and standard 1” (25) thick, 7 3/4” x 7 3/4” (197 x 197) square,
(specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
6 Downloads
|
|
|
MIFAB Series FS1750, 8” Round x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included. |
No Rating |
Product Version: Unknown
53 Downloads
|
|
|
MIFAB® Series F1440 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 12” (305) hinged square, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
7 Downloads
|
|
|
MIFAB Series FS1760, 12” Round x 8” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included. |
No Rating |
Product Version: Unknown
48 Downloads
|
|
|
MIFAB® Series F1460 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 15 ¾” (400) square, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
273 Downloads
|
|
|
MIFAB Series MI-G-L ____ sanitary, acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include:
removable baffle assembly and cross bar, securing bolt(s) external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid. MI-G-L-20 and MI-G-L-35 models shall be tested and certified to the ASME Standard A112.14.3 and PDI G-101. |
No Rating |
Product Version: Unknown
113 Downloads
|
|
|
MIFAB® Series F1460 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 15 ¾” (400) square, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
86 Downloads
|
|
|
MIFAB® Series F1510 lacquered cast iron floor drain with deep sump body, wide anchor flange, weepholes, and adjustable collar with square heavy duty ductile iron hinged tractor grate with four piece surface membrane clamp, sediment bucket and free area of 51 in² (32,903²). |
No Rating |
Product Version: Unknown
134 Downloads
|
|
|
MIFAB® Series R1900 neoprene vertical expansion joint with stainless steel no hub clamps. |
No Rating |
Product Version: Unknown
117 Downloads
|
|
|
MIFAB® Series F1540 lacquered cast iron floor drain with anchor flange, 20” (508) diameter fixed, heavy duty membrane collar with weepholes and standard 1” (25) thick, 12” (305) round, (specify material finish) tractor grate |
No Rating |
Product Version: Unknown
19 Downloads
|
|
|
MIFAB® Series R1960 fabricated Type 304 stainless steel downspout nozzle with hinged perforated bird screen cover in standard and flush models (Suffix -F). Are made to receive PVC, ABS or cast iron pipe inside the “A” dimension. The R1960 models “sleeve over the pipe sticking out of the wall. The R1960-F models sleeve over the pipe and are flush with the wall. |
No Rating |
Product Version: Unknown
171 Downloads
|
|
|
MIFAB® Series F1560 extra heavy duty lacquered area drain with side outlet body, internal deep seal trap and cleanout, seepage pan, standard 1” (25) thick, 12” (305) square heavy (specify material finish) hinged grate and suspended sediment bucket. |
No Rating |
Product Version: Unknown
173 Downloads
|
|
|
MIFAB Series FS1750, 8” Round x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included. |
No Rating |
Product Version: Unknown
258 Downloads
|
|