Armário Cozinha, podendo:

-Dimensões, Altura, Largura, Profundidade e Espessura da Moldura;

-Materiais: Moldura, Porta, Puxador e Tampo Superior;

-Visibilidade: Tampo superior. Caso oculte o tampo, adicionar a Altura do armário a altura que o tampo ocupava.

Product Version: Revit Architecture 2020

1133 Downloads

Armário Cozinha, podendo:

-Dimensões, Altura, Largura, Profundidade e Espessura da Moldura e Altura do Puxador;

-Materiais: Moldura, Porta, Gaveta, Puxador e Tampo Superior;

-Visibilidade: Tampo superior. Caso oculte o tampo, adicionar a Altura do armário a altura que o tampo ocupava.

Product Version: Revit Architecture 2020

1673 Downloads

Armário Cozinha, podendo:

-Dimensões, Altura, Largura, Profundidade, Espessura Moldura e Altura do Puxador

-Materiais: Moldura, Porta, Gaveta, Puxador e Tampo Superior;

-Visibilidade do Tampo superior: Caso oculte o tampo, adicionar a Altura do armário a altura que o tampo ocupava.

Visibilidade da Porta: Caso a oculte para deixar visível as prateleiras, oculte também o puxador. A altura do armário, some a altura do puxador.

Product Version: Revit Architecture 2020

1755 Downloads

Bancada contendo cuba sobrepor semi encaixe, frontão, pedra e saia, podendo:

-Alterar a posição das cuba (Esquerda/Centro) e seu material;

-Alterar dimensões (altura/largura/comprimento) da bancada;

-Alterar material do frontão, da pedra e da saia;

-Alterar altura dos frontões esquerdo/direito/fundos;

-Alterar altura das saias esquerda/direita/frente;

-Exibir/ocultar os frontões e a saia, de cada peça individualmente ou todas se desejar.

Product Version: Revit Architecture 2020

1364 Downloads

3' wide, modern 3d chair, simple

looks good in plan, elevation, 3d

Product Version: Revit Architecture 2020

3288 Downloads

Product Version: Unknown

1203 Downloads

Mercedes-Benz G-Class 2D family that has all it's view visible from all the elevations once placed on your 3d model. Enjoy

Product Version: Revit Architecture 2020

2636 Downloads

A Bike Storage Solution for High Density Areas

College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space.

Product Version: Revit Architecture 2020

105 Downloads

Product Version: Unknown

390 Downloads

Yet another Audi 2012 A6 2D Family visible from all elevations once placed on the 3D model. Model can be halftoned, applied color fill etc.

Product Version: Revit Architecture 2020

1184 Downloads

Exterior Floor drain based on ACO.  Change number of grids to change length.

Product Version: Revit Architecture 2020

2764 Downloads

This a 8x4.5m car paint booth with internal lights, not parametric, but should be pretty easy to edit to fit your model. (The lights might be a little too bright, idk)

The full model is 9x4.5m

Product Version: Revit Architecture 2019

1823 Downloads

Study Table for Office room/Bedroom

Product Version: Revit Architecture 2015

1512 Downloads

Product Version: Unknown

777 Downloads

This is a general brake and testing equipment for workshops and other things.

Product Version: Revit Architecture 2019

91 Downloads

My recreation of the Herman Miller Magis Spun Chair.

Material can be set.

Please rate and comment!  Thanks.

Product Version: Revit Architecture 2017

919 Downloads

My recreation of the UTU Helio II chandelier.

Material can be set for body 1, body 2, globes, finial, cord, and canopy.

Please rate and comment!  Thanks.

Product Version: Revit Architecture 2017

900 Downloads

MIFAB® Series MI-NEUT solid construction seamless polyethylene body with inlet and outlet, optional vent connections, acid resistant epoxy coated bolted down neoprene gasketed lid, stainless steel hardware. The tank is filled with neutralization medium, lump limestone 1” to 3” diameter size, water is then added to the tank to help dilution.

Product Version: Unknown

181 Downloads

logs for a fireplace

Product Version: Unknown

2060 Downloads

MIFAB® Series MI-E-O-HU__ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.

Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s).

Product Version: Unknown

130 Downloads

Product Version: Unknown

5310 Downloads

Modern chandelier, includes height instance parameter. Created with Revit 2021 (which was not an option when I uploaded).

Product Version: Unknown

5234 Downloads

Please rate and comment, thanks!

Took a while to figure out how to get these to work properly.

The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.

The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.com

Cans be individually rotated in project.

!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!

Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).

The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.

You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.

I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.

Hope these are helpfull for you!

Product Version: Revit Architecture 2017

1165 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

Product Version: Revit Architecture 2017

754 Downloads

To make it parametric. Please clcik the link.

Please support my Youtube Channel, if the family is helpful.>>>>https://www.youtube.com/watch?v=CG--y2WOQg4&list=PLFtpZGWL7M_Io7PDIUVY6qT0qwtQTwVmy&index=1

Product Version: Unknown

792 Downloads

Mushroom column with bamboo

Product Version: Unknown

4884 Downloads

A simple Table family,

Fully parametric family. Can edit all the values and materials.

HOW TO USE

Drag and drop the family into Revit or open from the downloaded location

Product Version: Revit Architecture 2017

507 Downloads

Standard No Can be on/off.

Product Version: Revit MEP 2018

2650 Downloads

Standard No can be on/off

Product Version: Revit MEP 2018

3455 Downloads

Fully Parametric Square Water Tank Family.LxBxH & each Cell can adjust. No of Base I Beam & Concrete can change & on/off

Product Version: Revit MEP 2018

1005 Downloads