Forums >> Revit Building >> Technical Support >> Walls show up on Second Level plan

Rmisfeldt

active

Joined: Tue, Nov 1, 2016
0 Posts
No Rating

Ok so I have my first floor plan (first level) and an interstitial plan (or second level)

I have floor slabs set to the second level

I can currently see my walls from first level on second level and im trying to figure out why they show up and how to make it to where they dont show up.

-The walls are top constraint to second level

-Top of walls is attached to second level

-Underlay range base level is none, where the orientation looks down

-No depth clipping (this didnt affect what i saw when i changed it)

-Graphic display is set to Hidden Line not Wireframe

-View ranges (all set to associated level second level) top offset is 6'-0", cut plane is 3'-0", bottom offset is 0'-0", view depth offset is 0'-0"

-Floor slab is set on second level which is 5' thick and height offset is 1'-0"

Any help would be greatly appreciated, thank you

This user is offline

Johnzo142

active

Joined: Fri, May 8, 2009
47 Posts
No Rating

Your second floor slab has a 1'-0" offset from level but your view depth offset is 0'-0"?

Are the walls attached to the floor or just constrained to the second level?

Either way, it sounds like the tops of the first floor walls are in your view range, especially if your second floor slab is 1'-0" higher than the second level....

Scratch that, I just created what you describe but could not recreate your problem.

This user is offline

Rmisfeldt

active

Joined: Tue, Nov 1, 2016
0 Posts
No Rating

I realized my walls were top attached to the slab of the 3rd level and that resolved my issue

This user is offline

Walls do not show up in plan view

3

My walls do not appear in an underlay on my roof plan.

5

create cellar level/floor plan below level 1 afterwards

2

Framing Plan - Getting Walls Below Floor to Show Openings

9

Walls in Framing Plan

3