Forums >> Revit Building >> Technical Support >> Ceilings Not Showing In Elevation/Section

dkgrar

active

Joined: Tue, Apr 21, 2015
0 Posts
No Rating

I have drawn several ceilings in my 12 story building in Revit 2014. When Icreate an elevation or section, no ceilings show up. It is not a visibilityproblem as the box is checked next to "Ceilings". It is not a filter asthere are no filters for my elevations/sections. The ceilings are also nothidden in the view as is evident when I toggle the hidden view on and off.Any ideas why they are not showing up?

This user is offline

teafoe5

site moderator|||

Joined: Fri, Nov 12, 2010
1749 Posts

Are they on the right phase? Are you using worksets?

This user is offline

View Website

dkgrar

active

Joined: Tue, Apr 21, 2015
0 Posts
No Rating

I am not working in worksets and it is drawn in same phase as is shown in the elevation

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Run some tests...

• Set the view to coordination.   You don't say what the setting is.
• Turn on all model categories in the view.  Anything there?
• Turn all categories off except ceilings.  Anything there?
• Cut a new section - sometimes views do become corrupt

This user is offline

Ceilings not showing

3

Slanted wall in section & sloped ceilings

3

Ceiling diffusers not showing up in ceilings when combined with architecturals

1

Elevation Tags not showing when I cut a Section View

4

Elevation shows as section

2