Forums >> Revit Building >> Technical Support >> Wall Section won't show in both plan and building section

mmeek

active

Joined: Fri, Jan 15, 2010
1 Posts
No Rating

I'm trying to get wall section references to show in both the plan view and in the building section view. 

If I create a wall section from the building section and then change it to show in all intersecting views, it won't show in the floor plan, and the reference shortly disappears from the building section, leaving a wall section without any referring views. 

If I create the wall section from the floor plan along the same line as the building section, it won't show in the building section. 

The plan views are associated with scope boxes - could that effect section visibility? 

Both the plans and building sections are at 1/8" scale, so the hide at scales coarser than setting shouldn't be an issue. We are using view templates, sections and callouts are set to be visible in both views. We're in 2014. 

Any thoughts? Thanks in advance. 

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Hide at scales coarser than can be set to any value... 1/8" scale doen't matter so still check that.

In order for a view reference to show, it must be cut by the view clipping plane.

"If I create the wall section from the floor plan along the same line as the building section..." << You are saying a parallel view - well that will not show.

This user is offline

Building section callout visibility in intersecting views

4

The option to create Wall section not showing up, only building section.

2

Managing multiple copies of a building section in the same project

3

My section cut symbols don't show on the floor plans

3

section line continuity between floor plan views

2