Forums >> Revit Building >> Technical Support >> creating a corregated metal roof

Gottmilk

active

Joined: Sat, Sep 29, 2012
2 Posts
No Rating

I am trying to model my existing roof system which is a 2" corregated metal deck with a few inches of rigid insulation and EPDM membrain roof.  I can not find a family where the repeating profile is shown that I can add materials to.  The default has metal joists and a 1/4 deck etc.  The floor systems seem to have a corregated deck system option when editing types with composite decks or overlay decks with different rib options. This does not show up in roofs.  How can I create this and attach it to my sloped metal joists that I modeled with the beam system tool?

This user is offline

Typhoon

site moderator|||

Joined: Tue, May 22, 2007
5921 Posts

Look at the bottom of this page - Similar Threads

-----------------------------------

I Hope and I Wish to LEARN  more, and more, and more.... REVIT

This user is offline

Gottmilk

active

Joined: Sat, Sep 29, 2012
2 Posts
No Rating

These links do not really address my issue.  These links are for standing seam metal roofs (external).  My situation is for the corrugated metal deck under insulation.  It is visible only from the underside.  Most big box stores in America have this exact system. 

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

It works the same.  It is a material instead of a model element.

This user is offline

Creating a standing seam metal roof in Revit 2024

0

Standing Seam Metal Roof help [ 1 2 ]

15

METAL PANEL ROOF

5

Need rendering material for metal roof and metal wall panels. Red paint finish.

2

Metal roof panels

2