Forums >> Revit Building >> Technical Support >> Vanity millwork with double sink family

ArchiGirl08

active

Joined: Tue, Feb 14, 2012
15 Posts
No Rating

Argh.... I am so frustrated....

I have created the family (attached) and it looks that sinks locations are locked. BUT when I stretch both sides of the counter to suit the length I need, sinks are not moving and stay where they are, eventhough I have locked the dimension from the edge of the counter.

If anybody please help, I would greatly appreciate it!

This user is offline

teafoe5

site moderator|||

Joined: Fri, Nov 12, 2010
1749 Posts

You need to align the center of the sink with the edge of the countertop.. not the reference line and it will work.  I got this one to work.

This user is offline

View Website

ArchiGirl08

active

Joined: Tue, Feb 14, 2012
15 Posts
No Rating

Thank you very much!

This user is offline

ArchiGirl08

active

Joined: Tue, Feb 14, 2012
15 Posts
No Rating

teafoe5

I am unable to open the file, nor unable to align the edge of the counter with the centre of the sink sue to constraints.

Could you please advise how exactly it should be?

Thank you very much!

This user is offline

Sink not visable when using counter top family

1

Vanity Sink and Counter Top and Toilet Paper Holder Visibility Issues

4

Nested family missing when host family is loaded into project

8

Millwork Family that Can Follow a Path

9

Sink family showing through extrusion in elevation

3