Forums >> Revit Structure >> Technical Support >> how can i make a rammed earth wall

quevedo12

active

Joined: Wed, Feb 23, 2011
2 Posts
No Rating

how can i make a rammed earth wall on revit an use it on a every project file? can someone please help me with this problem?

This user is offline

nastyclown

active

Joined: Mon, Jul 13, 2009
273 Posts

check this (first link)and this , and your help (f1)

This user is offline

nastyclown

active

Joined: Mon, Jul 13, 2009
273 Posts

quevedo, speak spanish?

If the answer is yes... please join us in revitcity chat, from 10am to 6pm

This user is offline

rnorrish

active

Joined: Wed, Feb 23, 2011
5 Posts
No Rating

Hi I was searching for the answer to this but ended up making one.

I used planting sand as the image with a travertine tile unlocked and re sized to create the bump. works really well

for graphics i found a drafting hatch made to suit and aligned with element seemed to work best.

Cheers all

This user is offline

andresvimos

active

Joined: Thu, Mar 7, 2013
0 Posts
No Rating

A la espera de sus comentarios.

This user is offline

rnorrish

active

Joined: Wed, Feb 23, 2011
5 Posts
No Rating

here is the SRE wall i use. it is sand based so the physical properites have'nt been filled in but easy to do with some reasearch about your local SRE properties. They vary depending on soil type used. This is a useful link. In Australia the formas are 600mm high x 2400 long

http://www.ibpsa.org/proceedings/BS2009/BS09_1530_1537.pdf

This user is offline

Fillet to wall

2

Earth and Wall cut patterns not showing in wall section...

7

Below grade earth pattern missing

7

Show earth hatch in sections, but not in elevations?

7

Earth and foundations in Architectural Elevations

2