Forums >> Revit Building >> Technical Support >> Window Cut Issue

BCARevit

active

Joined: Fri, May 15, 2009
14 Posts
No Rating

Hey all, 

So I have searched the forums to no avail, I have both modified AND created from the family editor a couple of windows that in the famile cut and flex with the wall width, and when placed in the project view perfectly in the 3D view. HOWEVER neither show up in detail when in Elevation or close section. At first I thought it might have been a view setting or visibility but now am unsure.  I've recreated the cut opening and resorted to even drawing from scratch (well from the Revit Window Family Template) with the same results.  

Any help is greatly appreciated. TIA.

Here is the family.   

This user is offline

BCARevit

active

Joined: Fri, May 15, 2009
14 Posts
No Rating

OK, nevermind..  I found out what the problem was.  Rather simple really.. 

We had linked our Structural subs model for coordination, so in essence we had 2 sets of walls on the problem elevation. Hiding their model solved the issue. 

This user is offline

window does not get cut in plan view.

6

window above cut plane is visible. why?

1

Window Family issue - Revit 2012

4

WINDOW ISSUE

3

Custom Window Cut

2