This is exactly like the face-based one but it is ceiling based if you would prefer that. 

Product Version: Revit Architecture 2013

5664 Downloads

This is a ceiling opening vent with simple rectangular bars across, based on the one on the ceiling I was modeling. It is very parametric. You can change the width and length of the vent, the width and distance bewteen bars, trim width and bracing depth.

Product Version: Revit Architecture 2013

3921 Downloads

This is just like the other dome security camera, except that it is ceiling based which you might prefer. 

Product Version: Revit Architecture 2016

7218 Downloads

This is a parametric railing made out of metal piping, although you can change the material. You can choose whether the middle railing exists. You can change the length, height, diameter of piping, distance from the end supports to the middle supports, and how many middle supports to get it just how you like. It is face based so you can put it anywhere

I saved a couple diameters and materials for you but you can make your own. 

Product Version: Revit Architecture 2016

11252 Downloads

Parametric Anchor bolt detail family. The bolt below the base plate is optional. Rod diameter, Projection above base plate, base plate thickness, etc. are all parameters. Embed Depth is an instance parameter. 

The pictures on the right are of the same family with different parameters. The picture on the left is how I used it. (That's why there is a grout thickness parameter. That's how embedment is measured.)

Product Version: Revit Structure 2018

3279 Downloads

Here is a parametric nut detail item for you. I couldn't find this in the imperial library, so I made one. You input the Rod Diameter and all the rest of the dimensions update. There is an optional masking region and optional washer (instance parameters). 

The dimensions are all based on the proportions of a nut for a 1-inch rod. The height of the nut is equal to the diameter of the rod. The washer is always 1/8" wider than the nut. I know actual nut and washer dimensions don't scale perfectly from that, but this worked for my purposes. If you need precise dimensions, you could just edit the family, take out the equations for the parameters and put in dimensions manually to save your types. 

Just beware if you do that, DIM2 and DIM3 need to be correct or the arches will mess up. I'd measure that first (in proportion to Rod Diameter) Before you changed them. 

Product Version: Revit Structure 2018

457 Downloads

Two metal wall mounted shelves. You can change the width, depth and space between them. You can also change how far the supports extend down and up. 

REVIT 2016 (not 2015)

Be aware that the elevation constraint measures from the bottom of the wall support, not the first shelf, so you might have to do some math. 

Product Version: Revit MEP 2015

14046 Downloads

This is based on a pizza or other food warmer and is parametric in dimensions and materials.

Product Version: Unknown

7232 Downloads

This is a companion to the other parametric bathroom stall but it has no walls, for the last stall on the end. Use the same parameters as the other family and the families should match. 

REVIT 2016

Product Version: Revit Architecture 2016

16362 Downloads

Fully parametric. You can change the width, height, depth, number of shelves, and trim width, and the materials. 

the difference between this and the other one is that you can choose how many shelves you want.

REVIT 2016 (not 2015)

Product Version: Revit Architecture 2015

8424 Downloads

A simple model of the glass fire case shown to hold a fire extinguisher or hose (not in the model). It's parametric, so you can change the width, height, and depth. It cuts from a wall. 

I suppose you could use this glass case for other purposes too. 

REVIT 2016 (not 2015)

Product Version: Revit Architecture 2016

2796 Downloads

This is a lot like the parametric wall vent except ceiling based, and improved. Now you can change the thickness, depth, and rotation of the louvres as well as how many louvres you want so you can get the right spacing. The vent dimensions, trim, and materials are also parametric. 

REVIT 2016

Product Version: Revit Architecture 2016

4774 Downloads

Simple Cylinder detail item.

Length and diameter are parameters. Option of a line, empty, or infinite on the end. (Picture shows the different visibility parameters.) Masking or not is also a parameter. 

This was used for deep foundation details but could have many applications.

Product Version: Revit Structure 2018

395 Downloads

Generic face based outdoor loudspeaker. The rectangle is  1' x about 7". Materials are parametric. 

Product Version: Revit Architecture 2013

1154 Downloads

A simple Face based electrical Outlet / plug in. Not parametric except materials. Behaves very nicely in 3D.

Product Version: Unknown

11623 Downloads

A parametric ceiling vent that splits the air both ways. You can change width, length, trim width and depth, bracing width and depth. You cannot change spacing or size of louvers. Also, width must be at least 1'.

Product Version: Revit Architecture 2013

6225 Downloads

This is a ceiling Access hatch/panel. you can change the dimensions and the materials of everything. It is ceiling based. 

Product Version: Unknown

19501 Downloads

Based on a door to a freezer room in the back of a subway. You can change the metal "splash" dimensions and the width and height of the door. 

Product Version: Unknown

20195 Downloads

Fully parametric wall mounted shelves.

No more of this downloading each width separately nonsense. :) You can change the width, depth, height of top shelf, height of bottom shelf, width between supports, number of shelves, materials, everything. 

REVIT 2016 (not 2015) The picture is all of the same family, with different parameters. 

Product Version: Revit Architecture 2016

20609 Downloads

A parametric wall cabinet/ display case with 4 doors. You can change the width, depth, height and materials. The doors will remain equal to each other in size. 

Product Version: Revit Architecture 2016

4357 Downloads

This is about as parametric as they come. A sign that hangs from the ceiling, and you can change the words and the position of them, and change the size and materials of basically everything. 

Product Version: Unknown

9273 Downloads

This is like a garage door except that it is not flush with the ground. You find them in service windows etc. 

It is fully parametric (height, width, elevation, size of panels, materials)

REVIT 2016

Product Version: Unknown

22298 Downloads

for the bathroom. This is very parametric: you can even change the door swing angle!

Product Version: Unknown

41399 Downloads

Ceiling based track lights. You can change the length and distance between lights to get the amount of lights you want.

Product Version: Unknown

25260 Downloads

A simple ceiling light, based on a 6" x 6" one. However, you can change just about everything about it: width, length, depth of bracing, thickness and width of trim, and the materials. So it doesn't have to be square or small. The light source changes size according to your dimensions. The glass looks gray because it is not rendered. 

REVIT 2016

Product Version: Revit Architecture 2016

30372 Downloads

simple face based red smoke detector. 

Product Version: Unknown

2730 Downloads

a 10' tall slatwall. Height is set, length and materials are parametric. slats are 4" apart. 

Product Version: Revit Architecture 2013

4287 Downloads

The picture shows steps but they are not part of the family.

You can change the material and the width between the two bars, but not the height or size of the grab bars. 

Product Version: Revit Architecture 2016

2133 Downloads

This is a parametric Wall vent. Credit should be given to another RevitCity uploader who made a wall vent, but I found it to be glitchy and fixed some things. Also, disregard the "elevation" constraint. This vent changes dimensions but the Louvers do not change size.

Product Version: Revit Architecture 2013

28299 Downloads

This file is a project containing a slatwall that you can copy to clipboard and paste into your project which will save the wall type. Because it is an actual wall instead of being wall mounted, you can put doors and other things in it as well as make it irregularly shaped.

Product Version: Unknown

5177 Downloads